Technical sheets Oli e grassi

It is an hydraulic fluid totally synthetic (synthetic hydrocarbons), with very high performances, specially developed for use in ceramic industry presses. It meets the requirements of the following specifications: ISO L – HV # DIN 51524 HVLP D

It is a hydraulic fluid formulated with high quality mineral base oil “group II” and selected ashless additives, developed specially for use in ceramic industry presses. It meets the requirements of the following specification and classifications: # ISO-L-HM # DIN 51524 Teil 2 HLP

It is formulated with “superior” group II mineral oil base stocks with special and selected additives with detergent/dispersant, antioxidant, antirust and antiwear properties to permit better performances and oilchange interval longer than standard mineral oils. It meets the requirements of the following specification: # ISO-L-HV # DIN 51524 Teil 3 HVLP-D

Antiwear hydraulic oil of superior quality, withan extremely high Viscosity Index, developed to satisfy the needs of modern Plants operating under the most severe conditions. It meets the requirements of the following classifications and specifications and/or is approved by the following manufacturers: - ISO-L-HV # - ISO 11158 # - AFNOR NF E 48603 HV # - AISE 127 # - ATOS Tab. P 002-0/I # - BS 4231 HSE # - CETOP RP 91 H HV # - COMMERCIAL HYDRAULICS # - EATON VICKERS I-286-S3 # - EATON VICKERS M-2950 # - DIN 51524 t.3 HVLP # - LAMB LANDIS - CINCINNATI P 68, P 69 e P 70 # - LINDE # - PARKER HANNIFIN (DENISON) HF-0 # - REXROTH RE 90220-1/11.02 # - SAUER-DANFOSS 520L0463

Polyglycol-based synthetic product, designed for lubrication of gears and bearings operating at high temperatures. It is particularly suitable for lubrication of worm screws gears characterized by high power-weight ratio. It meets the requirements of the following specifications: # ISO-L-CKD # DIN 51502 PGLP # ANSI/AGMA D 9005-D94 (AGMA Nr. 5S, 6S)

The eni BLASIA series has been developed to meet the widest range of requirements of EP (Extreme Pressure) lubrication, such as, for instance, gears operating under severe duty (ISO-L-CKD classification). eni BLASIA oils meet the requirements of the following specifications: # ISO-L-CKD # ANSI/AGMA 9005-D94 (AGMA 2EP, 3EP, 4EP, 5EP, 6EP, 7EP, 8EP) # ASLE EP # DIN 51517 teil 3 CLP # U.S. STEEL 224 # DAVID BROWN S1.53.101(5E) # - ISO 12925-1

The eni BLASIA series has been developed to meet the widest range of requirements of EP (Extreme Pressure) lubrication, such as, for instance, gears operating under severe duty (ISO-LCKD classification). eni BLASIA oils meet the requirements of the following specifications: # ISO-L-CKD # ANSI/AGMA 9005-D94 (AGMA 2EP, 3EP, 4EP, 5EP, 6EP, 7EP, 8EP) # ASLE EP # DIN 51517 teil 3 CLP # U.S. STEEL 224 # DAVID BROWN S1.53.101(5E) # - ISO 12925-1

The eni BLASIA series has been developed to meet the widest range of requirements of EP (Extreme Pressure) lubrication, such as, for instance, gears operating under severe duty (ISO-LCKD classification). eni BLASIA oils meet the requirements of the following specifications: # ISO-L-CKD # ANSI/AGMA 9005-D94 (AGMA 2EP, 3EP, 4EP, 5EP, 6EP, 7EP, 8EP) # ASLE EP # DIN 51517 teil 3 CLP # U.S. STEEL 224 # DAVID BROWN S1.53.101(5E) # - ISO 12925-1

The eni BLASIA series has been developed to meet the widest range of requirements of EP (Extreme Pressure) lubrication, such as, for instance, gears operating under severe duty (ISO-LCKD classification). eni BLASIA oils meet the requirements of the following specifications: # ISO-L-CKD # ANSI/AGMA 9005-D94 (AGMA 2EP, 3EP, 4EP, 5EP, 6EP, 7EP, 8EP) # ASLE EP # DIN 51517 teil 3 CLP # U.S. STEEL 224 # DAVID BROWN S1.53.101(5E) # - ISO 12925-1

Based on a fully synthetic oil (PAO) and a special combination of tackifiers, antiwear, anticorrosive and antioxidant additives. They are recommended for the lubrication of equipment operating at low and at high
temperature. Range of temperature °C -25/+180.

High quality hydraulic oils specially developed for use in all types of hydraulic systems and equipments. ISO L-HM

High quality hydraulic oils specially developed for use in all types of hydraulic systems and equipments. ISO L-HM

eni Rotra MP is an EP gear oil recommended for hypoid gears operating under severe conditions and for very highly loaded gears in general, especially those subject to dynamic loads. API GL-5, MIL-L-2105D, MAN 342 Typ M1 (SAE 80W-90), ZF TE-ML 16D, 21A (SAE 85W-140), ZF TE-ML 16B, 17B, 19B, 21A (SAE 80W-90).

eni Rotra ATF multi is a premium synthetic technology lubricant that is addressed to a variety of different automatic transmissions fitted on modern passenger cars and commercial vehicles, designed by the leading international manufacturers. GM DEXRON III H - CHRYSLER ATF+3, ATF+4, - FORD MERCON V - JASO M315 Type 1A, - ALLISON TES-295 - TOYOTA T-III, T-IV, - MAN 339 Typ V1, Z2 - NISSAN Matic D, J, K,- MB 236.3, 236.5, 236.6, 236.7, 236.9, 236.10, 236.11

High performance multipurpose yellow-brown, slightly-fibrous, smooth-textured lithium-base containing EP additives.  L-X-BCHB 2 # KP2K -20 # P-64

EP grey-black, smooth-textured, lithium-base grease containing molybdenum disulphide. DIN 51825: KF 2K -20,ISO 12924: L-XBCHB 2

Lithium complex greases formulated with synthetic base oil (PAO), suitable for high and low temperature applications. KPHC 2P -40 # L-XDEHB 2.

Based on aluminium complex thickener, fully synthetic base oil (PAO) and a special combination of antiwear, antirust, antioxidant, EP (Extreme Pressure) and white solids additives. L-XDCDB 00, GPF00K-40.

Eni Grease MSX 2/460 is an EP lithium complex grease, formulated with ISO VG 460 synthetic base oil (PAO). The presence of a high percentage of solid lubricant (molybdenum sulphide) improves the EP properties of the additives. DIN 51825: KPFHC 2R -40 #ISO 12924: L-XDFHB 2.

Alkaline active chlorine cleanser, specifically formulated for the systematic online cleaning of the molds.